JST buckets and attachments

BEFORE YOU ORDER ATTACHMENTS OR QUICK HITCHES

LOADERS | 8,500 - 40,000 KG

When ordering quick hitches and attachments for direct mounting for loaders over 8.5 tons it is extremely important that the following information is included in the order.

All information, numbers, letters and year in the model name

Example: A Case 721G is equipped with Z-bar kinematics as standard. A Case 721G XR has a Z-bar kinematics and an extended arm. These two models do not necessarily have the same undermining depth. A Case 721G XT is equipped with parallel kinematics and has completely different attachment points for bucket mounting.

READ THIS BEFORE YOU ORDER

Tire size and brand (full tire name and number)

Example: If large-pattern tractor tires are mounted on the machine, it will in many cases raise the machine approx. 7-8 above the ground. This is our normal undermining depth. Therefore, if we are not informed about the tire size and make, the bucket will not be able to reach the ground.

The final width of the machine including tires

Example: For example, when tractor tires are mounted, the width of the machine increases in many cases. And it is such a shame to produce buckets that don‘t have clearance from the wheels. We recommend at least 5cm on each side.

129

jstas.dk/en | +45 8140 6717 | ordre@jstas.dk | v 2024-4.0